|
|
|
|
|
|
TRAIL-GEAR Ultra Grey Silicone
|
|
List Price: $7.99
Our Price: $7.00
Savings: $0.99
|
|
|
Designed specially for high-torque and high vibration applications, exceeds manufacturers' performance requirements. Non-corrosive and low-odor. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54°C to 260°C) intermittent.
|
|
|
|
|
|
|
|
|
|
TRAIL-GEAR Tube Thimbles 5/16"
|
|
List Price: $12.99
Our Price: $10.00
Savings: $2.99
|
|
|
Synthetic winch line is expensive to replace so it is important to protect your line and make it last as long as possible. We at Trail-Gear understand that, so we developed a stainless steel tube thimble that will protect your line and keep it from twisting and fraying at the ends.
Our tube thimble is easy to install. Simply cut your line down a few inches until you have a new clean piece of line, push the line through the thimble and then braid the line so that the thimble is in place. Thimbles are offered for both 5/16" and 3/8" winch line.
|
|
|
|
|
|
|
|
|
|
TRAIL-GEAR Tube Thimbles 3/8"
|
|
List Price: $12.99
Our Price: $10.00
Savings: $2.99
|
|
|
Synthetic winch line is expensive to replace so it is important to protect your line and make it last as long as possible. We at Trail-Gear understand that, so we developed a stainless steel tube thimble that will protect your line and keep it from twisting and fraying at the ends.
Our tube thimble is easy to install. Simply cut your line down a few inches until you have a new clean piece of line, push the line through the thimble and then braid the line so that the thimble is in place. Thimbles are offered for both 5/16" and 3/8" winch line.
|
|
|
|
|
|
|
|
|
|
TRAIL-GEAR Shackle D-Ring 3/4 inch
|
|
List Price: $13.99
Our Price: $12.00
Savings: $1.99
|
|
|
D-Ring shackles make a great pull point for vehicle recovery. Working load limit 4 3/4" tons.
|
|
|
|
|
|
|
|
|
|
TRAIL-GEAR Trailer D-Ring 5/8 inch
|
|
List Price: $14.99
Our Price: $12.00
Savings: $2.99
|
|
|
Ideal for creating tie down points on trailers. Welds in place. Super tough, heavy-duty forged design.
5/8" Ring Diameter
Capacity: 18,000 lbs.
Working Load Limit: 6,000 lbs
4 3/8" overall width
|
|
|
|
|
|
|
|
|
|
TRAIL-GEAR Weld-On Attachment Flat
|
|
List Price: $39.99
Our Price: $20.00
Savings: $19.99
|
|
|
Trail-Gear’s Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is coped on the bottom so that it can be welded on to a 3" axle tube, and the other has a flat bottom that can be welded to plate, tubing, or any other flat surface. These make great attachment points for any rig or buggy, and work well with our 3/4" Shackle D-Ring. Sold individually.
|
|
|
|
|
|
|
|
|
|
TRAIL-GEAR Weld-On Attachment Coped
|
|
List Price: $39.99
Our Price: $22.00
Savings: $17.99
|
|
|
Trail-Gear’s Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is coped on the bottom so that it can be welded on to a 3" axle tube, and the other has a flat bottom that can be welded to plate, tubing, or any other flat surface. These make great attachment points for any rig or buggy, and work well with our 3/4" Shackle D-Ring. Sold individually.
|
|
|
|
|
|
|
|
|
|
TRAIL-GEAR License Plate Holder Kit 1.5" OD
|
|
List Price: $39.99
Our Price: $29.00
Savings: $10.99
|
|
|
Bolt on license plate holder, great for attaching your license plate to after market front or rear bumpers. With the included white LED light the license plate is easy to see and most importantly, keeps you legal. Clamps come for either 1 1/2" or 1 3/4" O.D. tubing. All mounting hardware is included, ships raw, unpainted.
|
|
|
|
|
|
|
|
|
|
TRAIL-GEAR License Plate Holder Kit 1.75" OD
|
|
List Price: $39.99
Our Price: $29.00
Savings: $10.99
|
|
|
Bolt on license plate holder, great for attaching your license plate to after market front or rear bumpers. With the included white LED light the license plate is easy to see and most importantly, keeps you legal. Clamps come for either 1 1/2" or 1 3/4" O.D. tubing. All mounting hardware is included, ships raw, unpainted.
|
|
|
|
|
|
|
|
|
|
TRAIL-GEAR Receiver Shackle Kit, 3/4"
|
|
List Price: $39.99
Our Price: $39.00
Savings: $0.99
|
|
|
Designed to fit into standard 2" hitch receivers. Makes a great anchor point for winch or strap recoveries. Made from 8620 forged tool steel. Working load limit 4 3/4" tons. Includes 3/4" D-ring and receiver mount. Zinc plated finish. Includes 5/8" hitch pin.
|
|
|
|
