Trail-Gear Suzuki Jimny T-Case Gear Set | Chain Drive | Electric/Pushbutton |17% High & 87% Low

Suzuki Jimny Electric/Push-button Low Range Transfer Case Gears

Trail-Gear is proud to introduce our first set of low range gears for Jimny chain-drive transfer cases. Our Jimny low-range gears will reduce the high-range ratio of your push-button transfer case by 17% and the low-range ratio by 87%. They will greatly improve your off-road experience on Jimnys with a tire size of 29" [736mm] or higher.

This complete kit includes (4) new gears made from high-strength SCM415 alloy steel and a new speedo gear to correct your speedometer. We also include a set of our Trail-Safe Jimny transfer case Input/Output seals along with (3) new staking nuts and a tube of Ultra Grey RTV silicone to seal your transfer case. Detailed instructions are provided to guide you through the installation. Minor clearancing of the transfer case housing required.

Note #1: If your Jimny has an automatic transmission, you will need to replace your transfer case chain with Suzuki t-case chain P/N 29225-84A00 (not included). Installing this gear set on transfer case from a Jimny with an automatic transmission may make your 4WD high range ratio slightly worse than your stock high range ratio. Check your stock high-range ratio before ordering this kit for a Jimny with an automatic transmission.

Note #2:  These gears are for Jimny pushbutton transfer cases only.  They will not work with Jimny manual transfer cases (planetary gear style).