Rock Krawler is proud to bring you the TJ 5.5 Triple Threat Suspension System. The Triple Threat Systems are the most versatile systems ever made for Wrangler TJ’s! These systems feature a front end design that can function as a full 4 link for high speed fun in the sand or the extremely flexy independent 3 link for extreme trail use! The best part is you get to choose! The rear end features a triangulated 4 link assembly that allows removal of the rear track bar for awesome articulation and full axle droop. All Rock Krawler upper control arms are full length! No short or mid length upper control arms with compromised geometry. Our geometry is perfect in every way. Our high clearance lower control arms are made of 2” solid alloy steel and use 1” shank Monster Krawler joints at the axle connection and the industry’s largest bushing at the frame connection for the quietest ride quality out of any suspension system on the market. We have even included a new heavy duty passenger side axle mount made of 1” thick alloy steel and 2 build a ball joints for the upper control arm pivots at the axle. No need to worry about wearing out the stock front upper control arm axle bushings since they have been replaced! Our unique modular skid plate design actually clam shells the frame top and bottom with no side drilling required. This adds structure to that frame! With the 3 piece construction; servicing of the driveline is easy and does not involve any suspension modifications. The frame rail members can be bolted in or welded on, yet again, it is your choice! The Rock Krawler weld on rear cradle and tie in plate ads a tremendous amount of structure to the rear axle housing making it bullet proof! Simply put, we feel this is the strongest, most versatile and most capable 5.5 Inch Long Arm system ever made. Rock Krawler also backs that up with our Abuse Proof Lifetime Guarantee on all hard parts!

• (4)Dual sport tuned linear coil springs
• (4)High clearance adjustable lower long arms made from 2.00" solid alloy steel
• (1)Skid plate and skid plate mounting brackets made from 1/4 thick laser cut steel
• (2)Full length adjustable front upper arms made from solid alloy steel
• (1)High misalignment/adjustable front track bar made from solid alloy steel
• (1)Front track bar relocation bracket made from 1/4" thick/laser cut steel
• (1)Rear upper triangulated 4 link arms made from solid alloy steel
• (1)Rear triangulated 4 link mounting cradle/axle truss and tie in plate made from 1/4" thick laser cut steel
• (1)Extended stainless steel brake lines
• (1)Front adjustable sway bar disconnects
• (1)Extended rear sway bar links
• (1)Hardware Kit
• (1)Detailed instructions

General Notes:


*Available for most common axle combinations (Dana 30, 44, 60, Ford 8.8, Dynatrac ProRoc’s). Can be adapted to fit Currie Rock Jock 60’s and Solid 60’s by rotating the rear cradle into the proper position instead of using the alignment tool provided.

**Requires a SYE with C.V. Driveshaft

***With long rear uppers, a custom cat back exhaust is required!

****Using the front end as a full 4 link system may require full manifold back exhaust modifications.

*****Rubicon Edition TJ's require a new rear driveshaft

******2003 TJ's equipped with 4 speed automatics will require removal of the factory automatic transmission skid plate if so equipped to allow for proper front driveshaft travel

*******To use as a full 4 link the OEM passenger side front upper control arm axle mount will need to be removed and the newly supplied mount welded in its place.

********Requires removal of the OEM rear upper control arm mounts off the rear axle.

*********Recommend using rear shock relocation brackets or rear shock shifters for some applications.

**********Choose your bump stop lengths after you choose your wheel/tire and fender combination.


Recommended Accessories:


- Rock Krawler Heavy Duty Tie Rod - $99

or

- Rock Krawler X Factor Plus Steering System - $399.00

- Rock Krawler Adjustable Weld In Poly Foam Bump Stops - $115 per pair.


Shock Notes:

It is recommended that high quality shocks be used with all Rock Krawler Suspension Systems. The Rock Krawler RRD Racing Shocks are a great choice! Bilstein 5100’s are also a good choice.


Front RRD Racing Emulsion Shock Part Number RRD02052 ($225 Each)

Rear RRD Racing Emulsion Shock Part Number RRD02053 ($225 Each)

Get a set of (4) RRD Racing Shocks for only $849!


Front RRD Racing Remote Reservoir Shock Part Number RRD02052RR ($335 Each)

Rear RRD Racing Remote Reservoir Shock Part Number RRD02053RR ($335 Each)

Get a set of (4) 2.0 Remote Reservoir RRD Racing Shocks for only $1299!


Bilstein 5100 Recommended Part Numbers

Front - BE5-A940-H5

Rear - BE5-A939-H5


Generic Front Shock Recommendation - 19" Collapsed - 31" Extended

Generic Rear Shock Recommendation - 17" Collapsed - 27" Extended