Click on image to zoom

Ford Evolution - 1994-2003 Ford 7.3L Evolution Programmer   -15000

Edge’s first generation programmer, the Edge Evolution improves driveability and delivers horsepower and torque gains. The Evolution can display and clear diagnostic trouble codes and adjusts speed and rev limiters. Incredibly, the Edge Evolution is the first programmer to keep on working once the ECU is flashed. By leaving the Evolution attached, it will provide 0-60 and quarter mile times.
Was: $377.84
Sale: $343.49
Save: 9%
Save: $34.35
Free Shipping


  • 0-60 and Quarter mile performance tests while leaving the programmer attached.

    The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge Evolution module. Power gains may vary based on vehicle and geographical location.

    Ford 1994-1997 7.3L Powerstroke

    Level 0: Stock 
    Level 1: 40 Horsepower - 80 Foot Pounds of Torque 
    Level 2: 60 Horsepower - 140 Foot Pounds of Torque 
    Level 3: 80 Horsepower - 180 Foot Pounds of Torque 

    Ford 1999-2003 7.3L Powerstroke

    Level 0: Stock 
    Level 1: 60 Horsepower - 100 Foot Pounds of Torque 
    Level 2: 80 Horsepower - 160 Foot Pounds of Torque 
    Level 3: 100 Horsepower - 200 Foot Pounds of Torque 

    Not legal for on-street use in the state of CA. Product is currently undergoing required emissions tests in order to be granted an Executive Order (E.O.) number from the California Air Resources Board (CARB), allowing legal, on-street use. New versions of the product will result from this activity and Edge customers will be informed of that on this website. Watch for this announcement soon.
  • Features

    • Additional 100 HP and 200 ft. lbs of torque for the 1999-2003 and Additional 80 HP and 180 ft. lbs of torque for the 1994.5-1997
    • Three power levels
    • Displays and clear diagnostic trouble codes 
    • Simple installation 
  • Manufacturer Notes

    The Evolution programmer has the ability to remove/adjust your vehicle’s factory speed limiter. Improper use of this feature could result in a serious or fatal accident. Removal/adjustment of the factory speed limiter is intended for use in a closed circuit, legally sanctioned racing environment. Even if racing in a legally sanctioned racing environment, it is your responsibility to ensure your tires and other vehicle components are rated to travel at increased speeds with the speed limiter removed/adjusted. If you remove/adjust the speed limiter during highway driving, it is your responsibility to obey all driving laws, including adhering to posted speed limits. 

    Removing/adjusting the speed limiter for purposes inconsistent with the product's intended function, as stated herein, is a violation of the product’s intended use and invalidates the product's warranty. Edge Products is not responsible for or liable for the consequences of improper product use.


    • EDG15000
    • EDG15000
    • Edge
    • New

    Shipping Information

    • Item Requires Shipping
    • Free Shipping

    Customer Reviews

    Comment Total Reviews (0)

    Write the First Review!

    You must login to post a review.

    • Have a question? Ask the Pros
    • 888-411-8493Mon - Fri 9:00 - 5:00 PM PST