TJ Creeper Locks
Trail-Gear is expanding our Creeper Lock Wheel line to include wheels for TJs, Ford Rangers, and many other applications! Creeper Locks are 17" X 9" wheels with a backspacing of 3.75" standard (4.25" and 5" backspacing available upon request. Call your favorite Authorized Trail-Gear Dealer or TG Customer Service for lead time and pricing). Each wheel is made from a solid piece of aluminum and weighs a whopping 45 lbs with locking ring and hardware. These are no ordinary aluminum wheels, Creeper Locks are super tough and built to last. Each wheel is cast with the inner beadlock as part of the wheel. All 24 of the bolt holes on the wheel have steel Time-Serts® installed to prevent the bolts from galling. Drop down inner lip centers tire onto wheel during mounting.
Each Creeper Locks Beadlock Wheel will include a TG Hub Cover at no additional cost!
Need new lug nuts? Check out our selection of replacement lug nuts here.
- Solid Heavy Duty Design
- 17" Rims, 9" Wide
- 3.75" Back Spacing
- 24, Grade 8 5/16" bolts
- Time-Sert® Inserts Installed
- Wheel Rating, 2200 lbs Each
- Aircraft grade 6061 T6 billet aluminum Beadlocks Rings
- Jeep Wrangler TJ 1996-2006 (All Models)
- Jeep Wrangler Unlimited 2003-2006 (All Models)
- Jeep Wrangler YJ 1987-1995 (All Models)
- Jeep Cherokee XJ 1984-2001 (All Models)
- Jeep Grand Cherokee ZJ 1993-1998 (All Models)
- Ford Ranger 1984-2012 (All Models)
- Ford Bronco II 1984-1990 (All Models)
- Ford Explorer 1991-2010
- Toyota Pickup 2WD 1980-1995
- Toyota Tacoma 2WD 1995-1997
Our Creeper Lock Wheels will now come with our new Creeper Locks Sectional Beadlock Rings. Our new Creeper Locks Sectional Beadlock rings offer a variety of advantages over a traditional single beadlock ring:
- Interlocking design.
- Aggressive knurling for a better bite into the rubber of the tire.
- Increased material thickness.
- Deeper recesses for the bolt head.
- Single segments can be replaced if damaged.
- Multiple color options.
- Compatible with all existing TG 17" beadlock wheels.
Our Creeper Locks Sectional Beadlock Rings have been tested extensively at some of the world's hardest courses, such as “The Hammers" in Johnson Valley, California and the Rubicon trail in Lake Tahoe, California as well as the Ultra4 racing circuit.
Solid Heavy Duty Design
17" Rims, 9" Wide
3.75" Back Spacing
Center bore: 3.25" (83mm)
24, Grade 8 5/16" bolts
Time-Sert® Inserts Installed
Wheel Rating, 2200 lbs Each
Aircraft grade 6061 T6 billet aluminum Beadlocks Rings
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period commences on the purchase date of the product. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
To begin your warranty claim:
Please contact Trail-Gear Inc. prior to returning any product under warranty to verify that warranty is still in effect. Please call 559-252-4950 or email firstname.lastname@example.org.
Once you have verified the product is still under warranty, the product must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products ATTN: WARRANTY to 5356 E. Pine Avenue, Fresno, Ca 93727.
Please place a copy of the original invoice clearly marked on the outside of the package.
Please include a short note stating the problem you are experiencing.
If any of the above mention policies is not met, the package will be refused or warranty claim denied.
By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at email@example.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.