SUPERATV Polaris Ranger XP 1000 6" Portal Gear Lift

Polaris Ranger XP 1000 6" Portal Gear Lift 

The Portal Advantage 
Put a 6" Portal Gear Lift from SuperATV on your Polaris Ranger XP 1000 and you'll never ride the same way again. With Portal Gear Lifts you get a massive 6" lift and a 45% gear reduction in one package. The gear reduction saves your axles and driveline, and it gives you more torque. Turn huge tires easily! All that and 6" of extra clearance. Sounds great doesn't it? That's what Gear Driven Performance by SuperATV is all about. 

45% Gear Reduction 
With a 45 percent gear reduction (1.82:1 ratio), you can do anything you want. That means freedom to run huge tires that still feel like stock. With Gear Driven Performance, you're getting more than a gear ratio, you get freedom. Push your UTV harder than you ever have before without breaking an axle or a prop shaft. Ride harder and higher. Gear Driven Performance means freedom and fun. 

Performance 

• 45% gear reduction
• Designed for all terrains and riding styles
• GDP maintains performance-ready axle angles

Impenetrable Bearings and Seals 

• First in the industry thrust bearing that is specifically designed to take axial load, unlike the standard bearing that is only sufficient for radial loads
• Automotive grade bearings
• Press fit, precision ground gears and shafts to eliminate unwanted slop

Precision-Ground Gears: drive gear, idler gear and driven gear 

• Precision-ground chromium titanium alloy gears
• Reduced friction build-up
• Quiet gears at all speeds
• Allows you to run at higher speeds

Gen 2 Portal Drive Shaft 

• Designed to be unbreakable
• Made of 4340 hardened steel
• 1.5 in diameter (40 mm)
• M30 threads

Steering Arm 

• Heavy duty structural member
• 10.9 grade hardware
• Modular design for improved functionality

Gen 2 Aluminum Housing 

• CNC machined solid aluminum housing for superior strength
• Polished aluminum for long lasting, stylish finish

Mounting Plates and Pivot Blocks 

• CNC formed, fully gusseted 5/16" mounting plates
• Forged pivot blocks
• Carbon steel caliper mounting plates

Gen 2 Slotted Rotors for Unmatched Cooling 

• Each wheel hub includes 4 bolt patterns 4/156, 4/137, 4/115, 4/110
• Ability to utilize different wheels on same hub
• Extra thick hub designed to handle any torque
• Stainless steel, braided brake lines included in each kit

Wheel Requirements 

• Requires an 18" or larger wheel
• 18" wheels can not exceed 4-1/2" backspacing
• 20" and larger wheels can not exceed 5" backspacing

FITMENT

Recessed Nut Kit required for most aftermarket axles. Not required when using Stock, Rhino Brand and ADR axles.